DESCRIPTION OF PARTS
1.Cutting head
2.On/off switch
3.Charge port
4.Clip-on comb attachment (Namely 3, 6, 9 and 12mm)
5.Adaptor
6.Small bottle of lube
7. Cleaning brush
PREPARING FOR USE
1 The appliance as supplied by the manufacturer is not yet ready for use. It must be electrically charged prior to use.(220-240V 50/60Hz)
2 After charging the appliance is ready for use. It can be used with or without the clip-on comb attachment. To attach the clip-on comb
attachment, slide it onto the cutting head1 until it clicks into position. The appliance must be switched off while the clip-on comb
attachment is being attached or removed.
3 The clip-on comb attachment is easily adjustable. Simply slide it up or down the cutting head 1. The hair can be cut to 4 different
lengths ranging from approximately 3mm to 12 mm. The position of the clip-on comb attachment on the cutting head determines the
length of the haircut (Fig.1).
REPLACING THE CUTTING HEAD
Use the fingers to nip the top of blade,break off the blade along the direction of the arrow shown (Fig.2).
CLEANING AND MAINTEN-ANCE OF THE APPLIANCE
Switch the appliance off before cleaning or carrying out maintenance!
In order to ensure that the appliance remains in perfect working order, it is important to note the following instructions:
In order to retain the load capacity of the storage battery we recommend to use the storage battery until it is empty before reloading.
Wipe the appliance with a cloth only (which may be slightly damp, if necessary). No solvents or lubricants may be used.
After use, take off the clip-on comb attachment and remove any residual hair from the cutting head with a cleaning brush.
In order to ensure good cutting results and a long life, it is important to oil the cutting head frequently (Fig.3).